Good Morning from my Robotics Lab! This is Shadow_8472 and today it’s bully or be bullied as I take another swing at getting my Nextcloud instance even partially usable. Let’s get started!
If there’s one long term project of mine that just loves humiliating me, it’s getting Nextcloud operational. My eventual goal is to have it running in a rootless Podman container with a way to quickly move it to an auxiliary server. My strategy thus far has been to prepare three Podman volumes hosted on GoldenOakLibry (NAS) over NFS while accounting for the speed needs of the MariaDB and Nextcloud volumes with an SSD and vs the capacity needs of the PhotoTrunk volume with a RAID 5 array of HDD’s.
NAS: Network Attached Storage
NFS: Network File System
SSD: Solid State Drive
HDD: Hard Disk Drive
Lowering Expectations
I’ve lost count of how many times NFS has given me grief on this project, so I eliminated it. I moved the SSD from where it was on GoldenOakLibry to ButtonMash, my main server computer. I added it to /etc/fstab – bricking Rocky Linux. ButtonMash is dual booted, so I booted to Debian for repairs.
Rocky’s installation system uses an LVM2 format, which Debian can’t read by default. An LVM2 package exists, and I installed it. LVM2 partitions show up in lsblk as sub-partitions of an actual partition, and it is these sub-partitions that get mounted, for example:
sudo mount /dev/rl_buttonmash/root /mnt/temp
to mount the sub-partition that shows up as rl_buttonmash-root. While I did explore for a quick fix, it’s a very good thing when each side of a dual booted machine can repair the other. Mounting a file system is a very important tool in that kit.
Upon closer inspection, a contributing factor to bricking Rocky was the root account being locked. The computer booted into an emergency mode and got stuck in a loop ending with “Press ENTER to continue…” Unlocking it didn’t get me anywhere when I looked at the logs per the loop’s recommendation, but the command lsblk -f clued me in that I was mounting the drive using the wrong file system type, an error which was soon remedied after I discovered it.
Project Impossible
The move hardly seemed to fix anything as hoped. I didn’t solve much. I kept getting NFS related errors when trying to run the pod, even after moving to a new mountpoint I’d never touched with NFS automounts. I even tried mounting the volumes using hard links pointed at the mounted “data drive” and I still couldn’t get a working Nextcloud instance. Somewhere in my shambling among the apparently limited content available regarding this topic online, I found the following warning on Oracle’s Podman documentation:
Caution: When containers are run by users without root permissions, Podman lacks the necessary permissions to access network shares and mounted volumes. If you intend to run containers as a standard user, only configure directory locations on local file systems [1].
Rootless Podman lacks network share permissions. OK, so NFS out unless I can selectively give Podman network permission without going full root. Until then, Podman is limited to the local disk, and if I’m understanding this warning correctly, mounted drives are also off the table. My plans for a Photo Trunk upgrade may be grounded indefinitely, and with ButtonMash’s Rocky drive being only 60GB, I’m not looking to burden it with anything resembling bulk storage.
Takeaway
The next logical innovation would be to rebuild the project on a computer with more storage. Barring a full makeover of ButtonMash, I do have my Red Laptop as an auxiliary server. I made a new account, but in all reality, this inspiration came after my research cutoff. It’s a project for another week once again.
Final Question
My project directory is messy with scripts to the point where I started a README file. Have you ever had a project so involved as to need one?
I look forward to hearing about it in the comments below or on my Socials.
Work Cited
[1] Oracle, “Configuring Storage for Podman,” oracle.com, [Online]. Available: https://docs.oracle.com/en/operating-systems/oracle-linux/podman/podman-ConfiguringStorageforPodman.html. [Accessed July 27, 2023].