Good Morning from my Robotics Lab! This is Shadow_8472, and today, I am covering the new Raspberry Pi 400 I have. Let’s get started!<\/p>\n\n\n\n
The Raspberry Pi 400 is the latest in the Raspberry Pi lineup. Contrary to all its brethren, there will be no aftermarket case for this small computer: the PCB (Printed Circuit Board) has been redesigned to fit inside an official Raspberry Pi keyboard. The specs are comparable to the Pi 4 model B, but with a heat sink built in under the keyboard and a newer CPU with hardware bugfixes, the Pi 400 comes already running a little faster than its Pi 4 siblings.<\/p>\n\n\n\n
I made my own Pi 400 kit because I needed some extra peripherals for my other Pi’s, like an extra, longer HDMI to mini HDMI, and a USB C type power switch. I already have a number of SD cards running around, so I don’t need one included.<\/p>\n\n\n\n
As I opened the box, I noticed only three USB ports, two blue and one black. I was otherwise using it for a keyboard, so it works out. Still, universal recievers are a thing, and in such a case, a user would be down a port relative to normal operation. Everything else from the sides appears to now be on the back. Note, I am not intimately familiar with the GIPO pins, but there is a bank of them present.<\/p>\n\n\n\n
I am, however, familiar with the camera port normally found in the middle of the board, and no such port is apparent anywhere on the case. This is most likely because it’s being marketed more as a desktop on the go, though the educational\/experimental reasons for owning one are still present.<\/p>\n\n\n\n
One of the immediate reasons we got the Pi 400 was so we could have our entertainment system with a keyboard. (For those keeping record, the HDMI by the USB C power port is the HDMI LibreELEC wants.) Eventually, I want to rig an IR sensor to respond to a TV remote and I can pull the Pi 400 in favor of a regular Pi 4.<\/p>\n\n\n\n
But the problems start here. It’s a small complaint, but the time isn’t quite right. No matter where I look, there’s no place to set the time manually. It wants an Internet connection, and when I looked into it, it was if the operating system –which was fine on a regular Pi 4– didn’t see the Wi-Fi circuitry. <\/p>\n\n\n\n
I’m disappointed I have to write this section, but I put my Manjaro card in for easier terminal access, and it doesn’t show up no matter how many commands I try under advisement. With such a new computer on the market, the first help forum topics are still being written.<\/p>\n\n\n\n
What is still beyond me is that when I put my Raspian SD in, the thing worked normally. I was able to go online and perform a search. I even pulled up content from SpaceX’s latest fireball, SN 8, fresh that day. The circuitry works, but 2\/3 cards say it’s not there.<\/p>\n\n\n\n
I’m afraid I was unable to carry on diagnostics past this point. The two cards that didn’t see the wireless were 64 bit, and my Raspian card is 32. I had an image of the lost card (supposedly 64 bit Raspberry OS), so I tried burning it to my last clean micro SD. It took a while to flash, but the Internet worked. I don’t know if I have a defective unit. What I do know is that any warranty I have is ticking. I’d rather not ship off for a replacement until I’m sure of what’s going on. The closest I saw to these symptoms was maybe something on the Pi 4 jamming its own Wi-Fi somehow. I know I’ve been focusing on 64 vs 32 bit, but my tests could just as easily be official vs 3rd party. My next test should probably be to find a 32 bit 3rd party OS to test. If it doesn’t work, maybe some drivers just need tweaking.<\/p>\n\n\n\n Final Question<\/p>\n\n\n\n I’ll make it simple this time: Where is an official 64 bit OS for the Pi? I believe it exists, but the site led me to believe I was downloading it and not something 32 bit.<\/p>\n","protected":false},"excerpt":{"rendered":" Good Morning from my Robotics Lab! This is Shadow_8472, and today, I am covering the new Raspberry Pi 400 I have. Let’s get started! The Raspberry Pi 400 is the latest in the Raspberry Pi lineup. Contrary to all its brethren, there will be no aftermarket case for this small computer: the PCB (Printed Circuit … <\/p>\ngetconf LONG_BIT<\/strong><\/code> said it was 32 bit though. Same story when I tried downloading a fresh copy of Raspberry OS.<\/p>\n\n\n\n